DAS NX-148E LCD Codepad Manual do Utilizador descarregar pdf (Página 8)

System Ready

Type code to arm

MAKING THE SYSTEM READY TO ARM

If the ready light is not on or if it is flashing, a zone is not secure. To identify this

zone, use the scroll keys to the right of the display to browse through• –

the zones that are not normal. If you wish to bypass or un-bypass one of these

zones, press the [BYPASS] key while that zone is being displayed. When

finished viewing the zones, press the key to return to the code entry screen.#

USING THE QUICK ARM

The Quick Arm feature may be used if it is enabled. Quick Arm will allow the

user to arm the security system in the ON mode by pressing the [ON] key. The

system can be quick armed in the PARTIAL mode by pressing the [PARTIAL]

key. This feature is used for ARMING ONLY, and will not disarm the security

system. This is ideal for a maid or baby sitter code, etc.

ARMING SYSTEM IN “PARTIAL” MODE

PARTIAL is utilized when the user is inside the premise and wants protection

around the perimeter. The steps to arm in the PARTIAL Mode are as follows:

Step 1 Close all protected doors and windows.

# Ready light must be on or flashing when all protected zones and

sensors are secure. NOTE: If any zones are bypassed, a sensor

in that zone can be violated without affecting the ready light.

# The security system will not arm if the ready light is not on or

flashing.

# If the power light is off, you have no AC power. Restore power if

possible. If not, contact your installing company listed on page 12

of this booklet for service.

Step 2 Press the [PARTIAL] key.

# The bypass light will illuminate indicating that all interior zone(s)

are bypassed. (All interior devices will bypass automatically,

giving the user freedom of movement within the interior area.)

# The partial light will not illuminate. NOTE: All non 24 hour zone

are delayed.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 32 33

Sem comentários

DAS NX-148E LCD Codepad Manual do Utilizador Página 8